D.I.Y. Valentine Balloons Using TeckWrapCraft Vinyl
This site contains affiliate links to products. We may receive a commission for purchases made through these links.
D.I.Y. Foil Balloon Sayings With Vinyl
Hey there crafty friends ! Susan here from SugarPartiesLA. Valentine’s Day is coming up and I thought it would be fun to D.I.Y some pretty heart balloons. I am always looking for fun ways to use vinyl. I found my balloons for $1.00 each at the dollar store so I had to snag a few. You ready for some cuteness?
Let’s get started!
Difficulty Level: Beginner
Estimated Time To Do: 20-25 min
Materials Used:
Heart Foil Balloons
Adhesive Vinyl (Teckwrap colors; pure red, lavender and pearlescent opal-hyacinth blue)
Cutting Machine
Weeding Tool
Transfer Tape
Cutting Mat
Step 1:
To start this project off we need a design ! I am using my cricut machine so, I searched what cricut had to offer for valentines day. I found these cute and simple conversation heart sayings. You can always make your own as well.
I also suggest choosing the colors of your vinyl before cutting your project. I chose 3 colors that I loved to match my balloons.
Colors:
Lavender
Pure Red
Pearlescent Opal-Hyacinth Blue
Step 2:
I took quick measurements of the heart balloon to give me an idea of how I wanted to size my image in design space before accidentally cutting out the wrong size.
Next step is crucial and you don't want to skip this !
Teckwrap craft sheets and vinyl may contain a plastic protective film layer that you must peel off prior to cutting. The protective film layer is there to protect the vinyl sheets from scratches (which I love). This is especially wonderful for shiny vinyl.
Step 3:
Now we are ready to load our mat ! Place the adhesive vinyl on the cutting mat with the shiny side facing upwards, load your machine and let’s hit start!
Step 4:
I set the material for cutting to Vinyl. Depending on the texture and thickness of the vinyl you are using you will be able to adjust it. The regular vinyl setting worked perfect for all my cuts.
Step 5:
One of my most favorite things about TeckWrapCraft Vinyl is the easy weeding. I first peeled off the larger area of my vinyl by hand by peeling the corner and pulling it off. It exposes just the image which makes it easier to focus on the smaller areas to weed out. Like the inner pieces of the words.
I use the sharp pointy edge of this tool to make it easy to weed out smaller pieces. You can use other weeding tools and pens as well but this is the one I went with this time around.
Step 6:
Next is applying transfer tape! I highly recommend using a not so sticky transfer tape. This will allow the transfer tape to not stick so hard to your balloon and may cause it to pop or leave extra sticky residue when peeling back.
Step 7:
Once you apply the vinyl make sure to give the words and letters a little rub to help it stick to your balloon and begin to peel back at an angle. When you slowly peel back your transfer tape at an angle it will allow you to go back and make sure if any letters have not stuck properly to lay back down the transfer tape and give the letters another little rub to push it back down on the balloon. I didn't need to do that extra step but you never know ! Sometimes things happen when crafting.
And check out the final product! Isn’t it so cute?!
I hope this inspires you to create your own vinyl decals for your balloons and spice up your décor.
Visit TeckWrapCraft to check out all their selection of vinyl. Let me know in the comments if you want to see more vinyl D.I.Y tutorials.
Happy crafting friends.
Hey there!
So glad you’re here! My name is Susan and I am founder of SugarPartiesLA. Here you will find party ideas, DIY crafts, party décor and lots of inspiration to help you recreate and celebrate life’s sweet moments!
Follow Us Here
